HEDELIUS pick-up magazine

Automatically change large or long tools

If very long tools such as deep-hole drills or tools with a large diameter such as disc cutters or spindle tools are required in a HEDELIUS machining centre, a pick-up magazine is the solution.

The pick-up magazine is mounted on the side of the machine table and offers space for up to 4 tools. The maximum tool diameter is 210 mm, while the maximum tool length is 600 mm. The magazine is pushed into the working space pneumatically to lose as little travel as possible in the machine. The previous manual tool change is no longer necessary. Your employees will have less work and their productivity will increase.

 

More intelligent metal cutting solutions.

Automatically exchange large or long tools with a pick-up magazine

Automatically exchange large or long tools with a pick-up magazine

If very long tools such as deep-hole drills or tools with a large diameter such as disc cutters or spindle tools are required in a HEDELIUS machining centre, a pick-up magazine is the solution. Find out more
Tool control panel for TILTENTA and FORTE machining centres

Tool control panel for TILTENTA and FORTE machining centres

All TILTENTA and FORTE machining centres can be optionally equipped with a tool control panel directly at the tool storage and retrieval station. Find out more
Rapid detection of drill breakage by sensor in the tool magazine

Rapid detection of drill breakage by sensor in the tool magazine

Thanks to the installation of a measuring device in the tool magazine of the ACURA, drill breakage is detected right away when the drill or tap is changed over. This allows you to ensure production qu... Find out more
A cleaner workspace

A cleaner workspace

Together with manually operated blowing and rinsing pistols for removing chips and blowing workpieces dry, the CNC machining centres can also be equipped with additional flushing nozzles, which increa... Find out more
Coolant treatment and high-pressure coolant supply at up to 75 bar

Coolant treatment and high-pressure coolant supply at up to 75 bar

HEDELIUS offers different cooling systems with coolant volumes ranging from 500 to 1,250 l, depending on the material to be processed and the selected CNC milling machine.  The systems can be equipped... Find out more
Rotary tables for multi-side and shaft machining

Rotary tables for multi-side and shaft machining

NC-controlled rotary tables allow you to extend the field of application for your HEDELIUS machining centre to shaft machining or multi-side work, e.g. with swing bridges or clamping cubes. Find out more
Mehr Spindelstunden durch Pendelbearbeitung mit Arbeitsraumtrennwand

More spindle hours with pendulum machining

The use of a workspace partition in the machining centre allows two closed, separate workspaces to be created from the machine’s workspace, for cost-effective metal cutting in pendulum mode. In specif... Find out more
Höchste Stabilität durch beidseitige hydraulische Klemmung

Maximum stability with double-sided hydraulic clamping

To ensure maximum stability even with heavy workpieces and roughing operations, the rotary/tilt table for the ACURA range is hydraulically clamped on both sides. This clamping feature can be deactivat... Find out more
Sauberes Arbeitsumfeld durch Vollkapselung des Arbeitsraumes

A clean working environment

The workspaces of CNC milling machines are fully encapsulated as standard. If connection to a central coolant extraction system is not possible, the machines may optionally be equipped with a stationa... Find out more
Automatic doors increase operating comfort and make the machine operator’s job easier

Automatic doors increase operating comfort and make the machine operator’s job easier

Motorised workspace doors on your CNC milling machine provide greater ease of use for your employees. Automatic doors come particularly recommended in the case of short workpiece processing times, as ... Find out more
Process control at high coolant pressures

Process control at high coolant pressures

Built-in windows in your CNC milling machine constitute an active precautionary measure, granting the machine operator a direct view of the processes taking place in the machine and ensuring greater s... Find out more
Operate apparatus and vices automatically

Operate apparatus and vices automatically

HEDELIUS machining centres can be equipped with a clamping hydraulic or pneumatic system for the automatic opening and closing of zero-point clamping systems and vices in the apparatus. Find out more
Automatisches Einmessen der Werkstücke mit 3D-Messtaster

Automatically measure and test tools in the machine

You can automatically measure the length and diameter of workpieces using a tool probe or laser mounted on the rotary/tilt table of your FORTE or TILTENTA machining centre, or check for tool breakage ... Find out more
Automatically measure and test tools in the machine

Automatically measure and test tools in the machine

You can automatically measure the length and diameter of workpieces using a tool probe or laser mounted on the rotary/tilt table of your ACURA CNC milling machine, or check for tool breakage in the NC... Find out more
Heidenhain or Sinumerik – the choice is yours

Heidenhain or Sinumerik – the choice is yours

HEDELIUS offers you top CNC controls for your machining centre in the form of Heidenhain TNC 7 and the Sinumerik ONE . They are equipped with a big touchscreen display and feature impressive clarity a... Find out more
Motor milling spindles with steep, BT or HSK tapers

Motor milling spindles with steep, BT or HSK tapers

Liquid-cooled Celox motor milling spindles for your HEDELIUS machining centre are notable for their quietness and precision. Available in different speed and performance versions and with steep, BT an... Find out more
Optimierte Abfuhr von Aluminium- oder Kunststoffspänen mit Scharnierbandspäneförderer für die ACURA Baureihe

Optimised removal of aluminium or plastic chips

Upon request, HEDELIUS machining centres can be equipped with slat-band chain conveyors for the optimised removal of aluminium or plastic chips. Find out more
Integrierte Schwerlast-NC-Rundtische

Integrated heavy-duty NC rotary tables

Thanks to the NC rotary tables integrated flush into the machine table, you can extend the scope of your TILTENTA CNC milling machine beyond 5-side machining, up to 5-axis simultaneous machining. Clam... Find out more
Optimierte Abfuhr von Aluminium- oder Kunststoffspänen mit Scharnierbandspäneförderer der FORTE Baureihe

Optimised removal of aluminium or plastic chips

Upon request, HEDELIUS machining centres can be equipped with slat-band chain conveyors for the optimised removal of aluminium or plastic chips. Find out more
Mehr Spindelstunden durch Pendelbearbeitung mit Arbeitsraumtrennwand

More spindle hours with pendulum machining

The use of a workspace partition in the machining centre allows two closed, separate workspaces to be created from the machine’s workspace, for cost-effective metal cutting in pendulum mode. In specif... Find out more
Coolant treatment and high-pressure coolant supply at up to 75 bar

Coolant treatment and high-pressure coolant supply at up to 75 bar

HEDELIUS offers different cooling systems with coolant volumes ranging from 500 to 1400 l, depending on the material to be processed and the selected CNC milling machine.  The systems can be equipped ... Find out more
Reduce set-up times with zero-point clamping technology

Reduce set-up times with zero-point clamping technology

Reducing non-productive time, setting up outside the machine, quickly pushing through an urgent order: this is where a zero-point clamping system comes in. It provides the machine operator with a mean... Find out more
Kühlmittelaufbereitung und Hochdruckkühlmittelzufuhr bis 75 bar

Coolant treatment and high-pressure coolant supply at up to 75 bar

HEDELIUS offers different cooling systems with coolant volumes ranging from 500 to 1,250 l, depending on the material to be processed and the selected CNC milling machine.  The systems can be equipped... Find out more
Standby-Magazin rationalisiert Ihren Fertigungsablauf

Standby magazine streamlines your production process

Having the right tools is essential in daily production. Searching for tools, calibrating them, transporting them and loading the magazine takes up valuable time and adds up to several hundred working... Find out more
Palettenspeicheranlage Marathon – und Ihre Produktion läuft

Marathon pallet storage system – really get your production up and running

The Marathon pallet storage system is designed and manufactured entirely by HEDELIUS and is perfectly matched to machining centres from the ACURA range. High transfer weights, multiple pallets, a smal... Find out more
Automatic workpiece measuring with 3D probe

Automatic workpiece measuring with 3D probe

A 3D probe for your machining centre allows you to determine the workpiece clamping position and the correct zero point in the NC program, compensate for clamping errors and measure distances and diam... Find out more
Serien 5-achsig im Pendelbetrieb bearbeiten mit zwei integrierten Rundtischene

5-axis series in pendulum mode

Upon request, some models from the TILTENTA range can be equipped with two integrated rotary tables for effective 5-axis pendulum machining. In order to maintain flexibility, the workspace partition c... Find out more
Automatic workpiece measuring with 3D probe

Automatic workpiece measuring with 3D probe

A 3D probe for your machining centre allows you to determine the workpiece clamping position and the correct zero point in the NC program, compensate for clamping errors and measure distances and diam... Find out more
Long-term precision

Long-term precision

All HEDELIUS machining centres are fitted with direct Heidenhain linear encoders at the factory itself. This ensures a high level of positioning and repeat precision over the long term. Find out more
Stufenlos schwenkbare Hauptspindel

Continuous swivelling main spindle

TILTENTA machining centres are provided with a continuously adjustable main spindle as an NC-controlled B-axis as standard. The swivel gear is designed free of play, and easily masters even heavy cutt... Find out more
Sauberes Arbeitsumfeld durch Vollkapselung des Arbeitsraumes

A clean working environment

The workspaces of CNC milling machines are fully encapsulated as standard. If connection to a central coolant extraction system is not possible, the machines may optionally be equipped with a stationa... Find out more
Sauberes Arbeitsumfeld durch Vollkapselung des Arbeitsraumes

A clean working environment

The workspaces of CNC milling machines are fully encapsulated as standard. If connection to a central coolant extraction system is not possible, the machines may optionally be equipped with a stationa... Find out more
Standard-Schnittstellen für zahlreiche Automationsanbieter

Standard interfaces for countless automation suppliers

Whether it’s a matter of pallet automation or robotic handling, HEDELIUS machining centres from the ACURA range offer pre-configured interfaces for easy connection and operation of common automation s... Find out more
Privacy Settings